X-Series Instructions



Download Instruction Manual (PDF)

This is a visual guide for attaching the power driver box of the X750 to its light bars.

* * * * * * * * * * * * * *
We STRONGLY recommend to NOT use a power drill for installing the 8 screws on X Series lights. The screws may become jammed or stuck and damage the light. PLEASE use a standard Philips head screw driver.
* * * * * * * * * * * * * *

Steps:
00:24 1. Unfold the X750 light bars and place the light on a flat surface.
00:35 2. Locate the 4 screw holes for the Driver Rails.
00:44 3. Place the Driver Rails with the raised edges outward over the lightbars.
00:55 4. Us the flat head (counter-sunk) screws to attach the Driver Rails to the light bars.
01:10 5. Ensure all 4 screws are snug (hand-tight).
01:23 6. Place the Driver box on the Driver Rails.
01:35 7. Make sure the power connector on the Driver is facing the power connectors on the light bars. This is where to connect the power cable in step 10.
01:50 8. Use the pan head (dome) screws to attach the Driver to the Driver Rails.
02:04 9. Ensure all 4 screws are snug (hand-tight).
02:10 10. Connect the Power Cable to the Driver and light bars.

KIND LED Grow Lights are the industry leader in indoor LED grow lights. We have consulted with hundreds of professional hydroponic and soil growers to rigorously research and develop their cutting edge LED indoor grow light technology that has since revolutionized the indoor growing industry. KIND is widely considered the best indoor LED grow light on the market today.